Select Store
EU
US
Rooster Chafe Plate
Earn [points_amount] when you buy this item.
- Supersaver Delivery receive by: Nov 29 - Dec 03
-
Order before 3pm (GMT) for Next Day Delivery
Rooster carbon effect self adhesive wear pads to stop the shrouds damaging your boom. (Shroud burn). Size 140mm x 45mm with rounded corners and is 0.45mm thick (with backing tape on). Being thin allows the pads to be moulded around slight flat curves as seen in the photos of the pads applied to the Selden Olympus Boom, (Solo) which has a side wall reinforcement.
Uses a 3M adhesive, make sure the boom is clean and dry before fitting. You must use a solvent like Isopropyl alcohol or acetone to thoroughly degrease the surface and then dry. Warming the surface (using a hot air gun on a low setting) will help to activate the glue on the chafe pad when applied,
NOTE: The chafe pad is sold as a single item. If you need 2 for a boom for example, then please set your quantity to 2.
Learn more about caring for your gear on our product care page here
